Measured Time Part Two Time Flies

Hi everyone, I hope you are all well I have for you today the second part 

of my original tag that went towards making Measured Time, (please
see 10th september post on this blog)

and now Time Flies.  

The instructions on how to make the base tag are on the post

Time Measured.

Here's a few photo's below of the original tag, The paste I used to 

put through the artistic stamper stencil Splats and was a crackle paste.

I enhanced the top with fired brick distress ink 

blended on with a blending tool.

Water colour paints and distress inks were used to colour the original 

tag and The Artistic Stamper Stamps were Numerical plate ,

Emphemera plate and graph paper stamp.

I triple embossed black card with gold embossing powder and stamped

 the artistic stamper post mark from the Katy Leitch carte postal plate.

I used grunge board for the clock and used the Tim Holtz 

clock die. I coloured the clock and embossed it to

 look like old rusted metal.

I used Viva Ferro Graphite I put it on the top 

of the tag with a palette knife.

I stamped the dragon fly from the Artistic Stamper insects and butterflies plate,

onto a piece of card. I coloured the card with metallic

 paints. I used Versafine Onyx Black and then used

 clear embossing powder over & heat set.

I cut out the wings and used beads from my stash to make up the body 

for the end of the tail I used Ranger gold Stickles.

I attached the dragonfly to the clock from the Tick Tock 

plate which had been embossed onto whites card

that had been coloured with broken china 

and spiced marmalade distress ink.

I assembled it all together and attached the postal marks

over the graphite which had been enhanced with 

Gilding wax.

That's it for today, I hope you have all enjoyed this two part 

project. Thank you for stopping by and please feel free to 

let me know what you think.

Cheers Dee x